Battlefield 1942 Mods, Modding Tutorials & Forums

Posted: **Fri Apr 23, 2010 4:49 am**

I made a rubber ducky hip pack

... but i can't get it to float. Not sure if this is even possible. I have added floaters to bundles before without a problem. Ive also made helmets with working collision meshes using a bundle that i addtemplate to the kitpart... and that works. Anybody got any ideas??

Code: Select all

rem *** Ducky HipPack for Mental Patients ***
ObjectTemplate.create KitPart Ducky_HipPack
ObjectTemplate.setBoneName HipPack
ObjectTemplate.setCopyLinksCount 0
ObjectTemplate.addTemplate Ducky_HipPack_bundle

ObjectTemplate.Create Bundle Ducky_HipPack_bundle
ObjectTemplate.geometry Ducky_HipPack
ObjectTemplate.hasMobilePhysics 1
ObjectTemplate.hasResponsePhysics 1
rem ObjectTemplate.HasCollisionPhysics 1
ObjectTemplate.addTemplate RHIB_Floater
ObjectTemplate.setPosition 0.5/-0.5/-0.5
ObjectTemplate.addTemplate RHIB_Floater2
ObjectTemplate.setPosition -0.5/-0.5/-0.5
ObjectTemplate.addTemplate RHIB_Floater
ObjectTemplate.setPosition 0.5/-0.5/0.5
ObjectTemplate.addTemplate RHIB_Floater2
ObjectTemplate.setPosition -0.5/-0.5/0.5

Bonus: The Affro & Party Hat helmets

Posted: **Fri Apr 23, 2010 5:21 am**

Two possibilities:

1. Your duckies have collision physics turned off. Perhaps turning on collision will make it work.

2. You may need to turn on Armor on your Duckies:

Code: Select all

ObjectTemplate.hasArmor 1
ObjectTemplate.hitPoints 0
ObjectTemplate.maxHitpoints 0

As I recall floaters will stop working when a PCO dies. Though I recall making a mobile control point float on water with no issue and I did not add armor to it. Perhaps adding collision physics is what you need. I wanted to make the helmets emitted from dead soldiers to float if they hit water but it seams anything with a "destroyed" status does not float.

Posted: **Fri Apr 23, 2010 9:48 am**

OMG Coroner47
you make some mint as mods dude

Posted: **Fri Apr 23, 2010 1:10 pm**

Haha, that duck is also on my long list for my mod

But as a pickup kit.

Posted: **Fri Apr 23, 2010 6:45 pm**

lolz

Just noticed that this was a kit part. I don't think floaters work on soldiers. Soldiers use their own system for floating and I think floaters can't override that. (I once tried to make dead bodies float to the surface but couldn't get that to happen.

)

Posted: **Fri Apr 23, 2010 11:56 pm**

i thing you could make it as a wep and make it deploy, just like a mortar. but it deploys a rubber duckey that floats ahah

Posted: **Sat Apr 24, 2010 2:32 am**

I spent a bunch of time looking for a solution to this, but nothing works so far. I turned on collisionphysics, armor & new floaters w/ maxed out lift. I changed the kitpart to activekitpart like the jetpack.... nothing is working.

I might just make the ducky as a kitpart & also a spawnable sea pco or as mike mentioned, a deployable wep/pco. I think apache is right about the soldiers having their own weird floating system.

Has anyone figured out yet how to attach a pco to a kitpart? I've always had the problem of the pco needing an engine to move with the soldier, which at that point the movement of the soldier becomes studdery & skips around. Maybe the floaters would work on a pco attached to a kitpart?

Posted: **Mon Apr 26, 2010 9:58 pm**

More problems!

These FloatingBundles are really messed up. The ducky has to drop level into the water, otherwise its flys away. Also, when the engine reaches a certain speed the ducky goes crazy & glitchy. Changing the "ObjectTemplate.setHullHeight" to "0" or the height of the floaters to "0" for some reason causes the ducky to fall through the map. Any ideas why this thing is so glitchy??

edit: Nevermind! All fixed!

The "Wing"s which are used as rudders were the problem. Not sure why they're causing glitchyness, but i removed them and made the ducky complex bundle a rotationalbundle (which steers way better) & it drops into the water without problem & drives beautifully now!

Now we can have a pool party!

Posted: **Mon Apr 26, 2010 10:58 pm**

Try Making the mass of the rubber duckey heavier and also try not to make the max and min float too high
If the min and max float ranges between 4 - 6 i think the mass should be around 2500 - 5000
i cant remember... but i no that if the object is too light it plays up like that

Code: Select all

ObjectTemplate.setFloatMaxLift 4
ObjectTemplate.setFloatMinLift 4

Posted: **Tue Apr 27, 2010 6:00 am**

The kit deployable ducky is completed & works great! Had to do alot of tweaking.

You can download the whole thing here (code, mesh, texture & animation).
http://www.mediafire.com/?nkzy3zmhzhg

Battlefield 1942 Mods, Modding Tutorials & Forums

My Ducky won't Float

My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float

Re: My Ducky won't Float